Type |
P15RVA1 / P15RVA2 | ||||||
Class of accuracy |
1 | ||||||
Mechanical input characteristics | |||||||
Excess pressure, Measuring range Initial value: ambient air pressure |
bar |
10 |
20 |
50 |
100 |
200 |
500 |
Fundamental resonance frequency of the membrane |
kHz, c. |
12 |
19 |
29 |
45 |
65 |
85 |
Overload cutoff at 23 °C [73 °F] |
% |
200 | |||||
Test pressure |
% |
200 | |||||
Destructive range |
% |
>200 | |||||
Under dynamic loading Permitted pressure Permitted oscillation bandwidth (in accordance with DIN 50 100) |
%
% |
100 | |||||
70 |
85 |
85 |
95 |
95 |
60 | ||
Material of parts affected by measurement medium |
|
1.4542 stainless steel | |||||
Dead volume |
mm3 |
700 | |||||
Change in dead volume |
mm3 |
2 |
2 |
2 |
0.6 |
0.5 |
0.3 |
Ambient conditions Rated temperature range Operating temperature range Storage temperature range |
°C [°F] °C [°F] °C [°F] |
−20...+70 [−5...+160] −25...+70 [−15...+160] −40...+85 [−40...+185] | |||||
Maximum mean temperature if installed horizontally or hanging below i.e. air− cooling at max. ambient temperature of +60 °C [140 °F] |
°C [°F] |
105 [220] | |||||
Impact resistance (type testing according to DIN IEC 68) Impact acceleration Vibration acceleration (frequency range 10...100 Hz) |
m/s2 m/s2 |
650 150 | |||||
EMC (in accordance with IEC 801-3) |
V/m |
10 | |||||
Protection system (according to DIN 40050, IEC 529) |
|
IP65 | |||||
Materials used for outer surfaces |
|
1.4301 | |||||
Weight (with cable socket plugged in) |
kg, c. |
0.19 |
Output characteristics |
P15RVA1 |
P15RVA2 | ||
Output signal |
V |
0...10 ±0.2 |
mA |
4...20 ±0.4 |
Zero signal |
V |
0.4 ±0.3 |
mA |
4 ±0.4 |
Temperature coefficient of zero signal per 10 K in rated temperature range |
% |
<±1; typically. ±0.5 |
% |
<±1; typically. ±0.5 |
Temperature coefficient of output range per 10 K in rated temperature range |
% |
<±0.5; typically. ±0.2 |
% |
<±0.5; typically. ±0.3 |
Characteristic curve deviation, Initial setting |
% |
<±1; typically. ±0.5 |
% |
<±1; typically. ±0.5 |
Highest measurement frequency (−3 dB) |
kHz |
2 |
Hz |
500 |
Auxiliary energy | ||||
Supply voltage rated range |
V |
18...30 |
V |
7...30 |
Reference voltage |
V |
24 |
V |
24 |
Effect of supply voltage when changed from 7 V to 30 V on the zero signal ,on the characteristic value |
|
− |
% % |
0.3 0.3 |
Effect of supply voltage when changed from 18 V to 30 V on the zero signal ,on the characteristic value |
% % |
0.3 0.3 |
|
− |
Maximum load resistance |
kΩ |
10 |
|
− |
Apparent ohmic resistance |
|
− |
kΩ |
<1.11) |
Maximum current consumption |
mA |
30 |
mA |
100 |
Absolute pressure transducer P15 - datasheet | PDF, 0.11 Kb |