General specifications | ||
Inputs |
Number |
4, electrically isolated from each other |
Transducer technologies |
|
Torque transducers, frequencies in general, counters, rotary encoders, incremental encoders, pulse encoders, shaft encoders (digital, sinusoidal, with/without index) |
Data rate |
Hz |
0.1 ... 96000 per channel, adjustable individually |
Bandwidth Time domain Frequency/Spectrum analysis |
kHz kHz |
approx. 10 38 |
Transducer identification (TEDS, IEEE 1451.4) max. TEDS module distance |
m |
100 |
Transducer connection |
|
D-SUB-15HD |
Supply voltage range (DC) |
V |
10 ... 30, nominal (rated) voltage 24 V |
Supply voltage interruption |
|
max. for 5 ms at 24 V |
Power consumption |
W |
< 6 |
without adjustable transducer excitation | ||
with adjustable transducer excitation |
W |
< 9 |
Transducer excitation (active transducers) Adjustable voltage (DC) Maximum output power |
V W |
5 ... 24; adjustable channel by channel 0.7 per channel / 2 in total |
Ethernet (data link) Protocol/addressing Plug connection Max. cable length to module |
− − m |
10Base-T / 100Base-TX TCP/IP (direct IP address or DHCP) 8P8C-modular plug (RJ-45) with twisted pair cable (CAT-5) 100 |
FireWire (module synchronization, data link, optional |
MBaud |
IEEE 1394b |
voltage supply) | ||
Baud rate |
400 (approx. 50 MBytes/s) | |
Max. current from module to module |
A |
1.5 |
Max. cable length between nodes |
m |
5 |
Max. number of modules connected in series (daisy |
− |
12 (= 11 hops) |
chain) |
|
|
Max. number of modules in a FireWire system (incl. |
− |
|
hubs1), backplane) |
|
24 |
Max. hops in a chain2) |
− |
14 |
Synchronization options EtherCAT NTP IRIG−B (B000 bis B007; B120 bis B127) |
|
FireWire (automatically, recommended) via CX27 via Ethernet via MX440A- or MX840A input channel |
Nominal (rated) temperature range |
°C [°F] |
−20 ... +60 [−4 ... +140] |
Operating temperature range |
°C [°F] |
−20 ... +65 [−4 ... +149] |
Storage temperature range |
°C [°F] |
−40 ... +75 [−40 ... +167] |
Relative humidity |
% |
5 ... 95 (non-condensing) |
Protection class |
|
III |
Degree of protection |
|
IP20 per EN60529 |
EMC requirements |
|
EN61326 |
Mechanical tests3) |
m/s2 |
50 |
Vibration (30 min) | ||
Shock (6 ms) |
m/s2 |
350 |
Dimensions, horizontal (H x W x D) |
mm |
52.5 x 200 x 122 (with case protection) 44 x 174 x 119 (without case protection) |
Weight, approx. |
g |
850 |
QuantumX MX460B - datasheet | PDF, 0.1 Kb |