Type |
|
AED9501A |
Amplifier board |
|
AD103C |
Measurment signal input |
mV/V |
±3, nominal ±2 |
Strain gage transducer (1...4 full bridge, each 350 Ω), RB Transducer connection |
Ω |
80...4000 6 wire circuit |
Length of transducer cable Bridge excitation voltage |
m VDC |
≤ 100 5 |
CANOpen |
kbit/s |
CANOpen |
Protocol | ||
Bit rate, max. |
10...1000 | |
Node address |
|
1...127 |
Length of interface cable |
m |
5000...25 |
DeviceNet bus |
kbit/s |
DeviceNet |
Protocol | ||
Bit rate, max. |
125...500 | |
Node address |
|
1...63 |
Length of interface cable |
m |
1000...100 |
Diagnostics bus |
kbit/s |
ASCII/Binary |
Protocol | ||
Baud rate |
38.4 | |
Node address |
|
0...89 |
Length of interface cable, max. |
m |
1000 |
Trigger input |
V |
0...1 |
Input voltage range, LOW | ||
Input voltage range, HIGH |
V |
2...30 |
Input current with High level = 30 V |
mA |
< 3 |
Power supply |
V |
10...30 |
Supply voltage (DC) | ||
Current consumption (without load cell) |
mA |
≤ 1201) |
Temperature range |
°C [°F] |
−10...+40 [+14...+104] |
Nominal temperature range | ||
Operating temperature range |
°C [°F] |
−20...+60 [−4...+140] |
Storage temperature range |
°C [°F] |
−25...+85 [−13...+185] |
Miscellaneous Dimensions (L x W x H) Weight, approx. Degree of protection to EN 60529 (IEC529) |
mm g |
190 x 65 x 40 440 (without AD10x) IP65 |
AED9501A - datasheet | PDF, 0.28 Kb |