Type |
AED9101C | |
Measuring amplifier |
|
AD103C |
Measuring signal input |
mV/V |
±3, nominal ±2 |
Transducer connection: |
Ω |
≥40...4000 |
Strain gage transducer (full bridge) | ||
Transducer connection |
|
6-wire circuit |
Transducer cable length |
m |
≤100 |
Bridge excitation voltage |
VDC |
5 |
Interfaces: Hardware (selectable via slide switch) Interface cable length RS-232 RS-422, RS-485 Max. number of bus members |
m m |
RS-232, RS-422, RS-485 ≤15 ≤1000 32 |
Diagnostics bus: |
kbit/s |
ASCII/Binary |
Protocol | ||
Baud rate, max. |
38.4 | |
Node address |
|
0 ... 89 |
Length of Interface cable, max |
m |
1000 |
Trigger input |
V |
0...1 |
Input voltage range, LOW | ||
Input voltage range, HIGH |
V |
2...30 |
Input current at High level = 30 V |
mA |
< 3 |
Supply: |
VDC |
6 ... 30 |
Supply voltage | ||
Current consumption (without load cell) |
mA |
≤ 1201) |
Temperature range: |
°C [°F] |
−10...+40 [+14...+104] −20...+60 [−4...+140] |
Nominal temperature Operating temperature | ||
Storage temperature |
−25...+85 [−13...+185] | |
Dimensions |
mm |
190 x 65 x 40 |
Weight, approx. |
g |
440 (without AD10x) |
Degree of protection according to EN60529 (IEC 529) |
|
IP65 |
AED9101С - datasheet | PDF, 0.28 Kb |