Type |
TIM‐EC | |
Supply | ||
Supply voltage |
VDC |
24 ±10% |
Galvanic isolation Torque, speed, EtherCAT. Ethernet and supply voltage are electrically isolated from each other Isolation voltage |
V |
500 |
Voltage discontinuity Test based on PLC standard DIN EN 61131-2: 24 V -10% |
ms |
10 |
Power consumption Without supply to transducers |
W |
<5 |
Communication interface | ||
Ethernet Data connection Protocol/addressing Plug connection Line length Cable type (minimum requirements) |
m |
IEEE 802.3, 10Base‐T / 100Base‐TX TCP/IP (direct address or DHCP), HTTP, UDP RJ45, 8‐pin :::100 Cat‐5, SFTP |
EtherCAT |
m |
EtherCAT Slave |
Function | ||
Data connection |
IEEE 802.3, 100Base‐TX | |
Plug connection |
RJ45 socket, shielded | |
Line length |
:::100 | |
Cable type (minimum requirements) |
|
Cat‐5, shielded |
Baud rate |
Mbit/s |
:::100 |
Refresh rate |
kHz |
:::20 |
Ambient conditions | ||
Nominal (rated) temperature range |
°C |
+10 ¼ +60 |
Operating temperature range |
-10 ¼ +60 | |
Storage temperature range |
-20 ¼ +70 | |
Permissible rel. air humidity, non‐condensing |
% |
10 ¼ 90 |
Housing | ||
Material |
|
Polyamide PA 6.6 |
Dimensions (W x H x D), without connections |
mm |
23 x 100 x 114 |
Weight, approx. |
g |
230 |
Mechanical stress capability |
m/s2 |
10 (5 ¼ 8 Hz) |
Vibration test based on IEC/DIN EN 60 068, Part 2‐6 | ||
(30 min in each direction) | ||
|
m/s2 |
25 (10 ¼ 65 Hz) |
Shock test based on IEC/DIN EN 60 068, Part 2‐27 |
|
|
(3 times in each direction, shock duration 11 ms) |
m/s2 |
200 |
Mounting |
|
Support rail DIN EN 60 715 |
Connection |
|
Plug terminal |
Degree of protection |
|
IP20 |
EMC conformity | ||
Emission of interference |
|
DIN EN 61 326:2006, Class A |
Immunity from interference |
|
DIN EN 61 326:2006, industrial environment |
Torque interface module TIM-EC - datasheet | PDF, 0.42 Kb |