Design |
|
Optimet-OMF glass fiber with Bragg grating symmetrically embedded in modified acrylic resin, potted in plastic material |
Core diameter of glass fiber, approx. |
μm |
6 |
Diameter of fiber cladding, approx. |
μm |
125 |
Outer diameter of coating, approx. |
μm |
195 |
Diameter of cladding, approx. |
mm |
1.5 |
Dimensions |
mm |
40.0 ±0.5 |
Length | ||
Width |
mm |
12.0 ±0.5 |
Height |
mm |
2.0 ±0.5 |
Connection (plug) |
|
FC/APC |
Available Bragg wavelengths |
|
1520,1525,1530,1535,1540,1545,1550,1555,1560, 1565,1570,1575,1580 |
Bragg wavelength tolerance |
nm |
±1 |
Gauge factor |
|
0.76 |
Gauge factor tolerance |
% |
±4 |
Maximum degree of reflection |
% |
15 |
Transverse sensitivity |
% |
0 |
Reference temperature |
°C |
23 |
Operating temperature range |
°C |
-40…+100 |
Storage temperature range |
°C |
-40…+100 |
Thermal cross sensitivity (TCS) thermal contribution of the sensor to strain signal |
μm/m/°C |
6.7 |
Tolerance of thermal cross sensitivity (TCS) |
μm/m/°C |
±1 |
Maximum elongation at reference temperature when |
μm/m |
20,000 (2%) |
using Z70 adhesive | ||
Absolute strain value for positive direction | ||
Absolute strain value for negative direction |
μm/m |
20,000 (2%) |
Fatigue life at reference temperature when using Z70 adhesive Achieved no. of load cycles LW on steel measuring body at alternating strain eW = ±1000 µm/m and variation of zero point < 30 μm/m |
|
>>107 (aborted after 107 load cycles) |
Minimum radius of curvature, longitudinal and transverse, at reference temperature |
|
25 |
Applicable bonding material Cold curing adhesives |
|
Z70, X60, X280 |
Optical strain gauge (SG) with extended temperature range OL-LT - РУССКИЙ технические характиристикихарактиристикитехнические характиристики26 / 10000 АНГЛИЙСКИЙ Перевести вGoogleBing technical parameters | PDF, 0.05 Kb |