Products

External display and control unit for MP85(A) and MP85(A)DP process controller DT85

Special features

Monitoring of fitting, press-fit and testing process in manufac- turing monitoring and auto- mation
Graphical display of all measu- red values and press-fit curves with OK / NOK results and statistics function
Parameterization and control of up to 10 MP85(A)DP amplifiers via CAN interface
Can be connected during opera- tion (hot plugging)
Without fan, maintenance-free, small mounting depth

DT85
Display		Backlit LCD display, monochrome background illumination with auto contrast function
Resolution	Pixel	320 x 240 (5.7 Zoll)
Active screen	mm	120 x 90
Face plate		plexiglas
Operation		6 function keys with tactile touch and encoder wheel
Password		Several input levels can be protected by password
Dialog		Menu language switchable German or English
Supply voltage	VDC	18 ... 30
Power consumption, max.	W	5
Electrical connection		2 x CAN-Bus (electrical separated), 4-pin COMBICON connector 1 x supply / 3-pin COMBICON connector 1 x RS232 for maintenance
Nominal (rated) temperature range	Co	0 ... +50
Storage (rated) temperature range	Co	−20 ... +70
Humidity rel.	%	20 ... 80 (not condensating)
Vibration (5−65 Hz), max. 3 times in each direction	m/s2	50
Shock (11 ms), max. 3 times in each direction	m/s2	200
Dimensions	mm	216 x 158 x 45 (w x h x d)
Mounting		8 fixing bolts M3
Cutout in the panel frame	mm	185 x 130 (w x h)
Degree of protection		IP52 front side, IP20 back side
Weight , approx.	g	800

External display and control unit for MP85(A) and MP85(A)DP process controller DT85 - datasheet

PDF, 0.22 Kb