General specifications | ||
Inputs |
number |
4, electrically isolated from each other and from the supply |
Transducer technologies per connector |
|
SG full and half bridges, inductive full and half bridges, piezoresistive full bridges, Current-fed piezoelectric transducers (IEPE / ICPâ), electrical voltage (±10 V), electrical current (20 mA) |
A/D conversion |
|
24 bit delta sigma converter |
Sample rates |
S/s |
Decimal: 0.1 ... 100,000 / 200,000 HBM Classic: 0.1 ... 96,000 / 192,000 |
Active low-pass filter |
|
Bessel, Butterworth, linear phase, filter off |
Transducer identification (TEDS, IEEE 1451.4) max. TEDS module distance |
m |
100 |
Transducer connection |
|
ODU MINI-SNAP, 14 pins |
Supply voltage range (DC) |
V |
10 ... 30 (nominal (rated) voltage 24 V) |
Supply voltage interruption |
|
max. for 5 ms at 24 V |
Power consumption |
W |
< 12 |
without adjustable transducer excitation | ||
with adjustable transducer excitation |
W |
< 15 |
Transducer excitation (active transducers) Adjustable supply voltage (DC) Maximum output power |
V W |
5 ... 24; adjustable channel by channel 0.7 per channel / 2 in total |
Ethernet (data link) Protocol/addressing Plug connection Max. cable length to module |
− − m |
10Base-T / 100Base-TX TCP/IP ODU MINI-SNAP, 8 pins 100 |
Synchronization options FireWire Ethernet EtherCAT IRIG |
|
IEEE1394b (2 ports per device) IEEE1588 (PTPv2) or NTP via CX27 EtherCAT Gateway module IRIG−B (B000 up to B007; B120 up to B127) via MX440B / MX 840B input channel |
IEEE1394b FireWire (optional voltage supply) |
A − m − |
IEEE 1394b (HBM modules only) |
Max. current from module to module Plug Max. cable length between nodes Max. number of modules connected in series |
1.5 ODU MINI-SNAP, 8 pins 5 12 (= 11 hops) | |
(daisy chain) | ||
Nominal (rated) temperature range |
°C |
−40... +80 dew point resistant |
Storage temperature range |
°C |
−40 ... +85 |
Relative humidity |
% |
5 ¼ 100 |
Protection class |
|
III |
Degree of protection |
|
IP65/IP67 per EN60529 |
EMC requirements |
|
per EN 61326 |
Mechanical tests Vibration Acceleration Duration Frequency Impact Acceleration Pulse duration Number of impacts |
m/s2 min Hz
m/s2 ms − |
as per MIL−STD202G, method 204D, test condition C 100 450 5 to 2,000 as per MIL−STD202G, method 213B, test condition B 750 6 18 |
Operational height, max. |
m |
5,000 |
Max. input voltage at transducer socket to ground (PIN |
V |
±5.5 |
13 or PIN 4), without transients | ||
PIN 1, 2, 5, 8, 11, 12, 14 (bridge and TEDS) | ||
PIN 3 (voltage) |
V |
±40 |
PIN 6 (current) |
V |
±1.5 |
PIN 5 (control circuits) |
V |
+ 3.3 |
Dimensions, horizontal (H x W x D) |
mm |
80 x 205 x 140 |
Weight, approx. |
|
1,900 |
SomatXR MX411B-R - datasheet | PDF, 0.37 Kb |