General Specifications | ||
Channels |
|
4, electrically isolated from each other, from the supply and from the data link |
Measurement categories |
V V V |
±1,000 DC or 1,000 rms AC ±1,000 DC or 1,000 rms AC ±1,000 DC or 1,000 rms AC |
Inside measurement category CAT II per EN 61010 Maximum operating voltage to ground potential Maximum operating voltage to other channels Maximum differential voltage | ||
Inside measurement category CAT III per EN 61010 Maximum operating voltage to ground potential Maximum operating voltage to other channels Maximum differential voltage |
V V V |
± 600 DC or 600 rms AC ± 600 DC or 600 rms AC ± 600 DC or 600 rms AC |
Outside measurement categorys per EN 61010 Maximum peak voltage to ground potential Maximum peak voltage to other channels |
V V |
± 1,250 DC or 1,250 rms AC ± 1,250 DC or 1,250 rms AC |
Maximum differential voltage, peak value |
V |
± 1,250 DC or 1,250 rms AC |
Maximum permissible transient overvoltage |
V |
±3000 |
Maximum temporary overvoltage Minimum loop impedance |
V mn |
none 100 |
Measuring ranges (Coverage) |
V |
±1,000 (±2000) ±100 (±200) ±10 (±20) |
Measurement frequency range |
Hz |
38,300 (four−channel use with 96 kS/s) 78,600 (dual−channel use with 96 kS/s) |
Data rate per channel (can be individually adjusted) |
S/s |
0.1 … 192,000 (dual−channel use) 0.1 … 96,000 (four−channel use) |
A/D conversion per Channel |
Bit |
24 (delta−sigma converter) |
Input impedance |
Mn / pF |
8 II <100 |
Measurement signal connectors |
|
4 mm laboratory plugs with rigid insulating socket, 19 mm grid between pos. and neg. connector |
Supply voltage range (DC) |
V |
10 … 33 |
Permissible supply voltage interruption, max. |
ms |
5 at 24 V DC |
Power consumption |
W |
<10 |
Data links |
|
Ethernet 10Base-T / 100Base-TX IEEE1394b FireWire |
Module synchronization |
|
IEEE1394b FireWire, EtherCAT via CX27, NTP via Ethernet, IRIG−B via MX440A/MX840A |
Degree of contamination |
|
2 |
QuantumX MX403B - datasheet | PDF, 0.1 Kb |