General Specifications | ||
Number of CAN ports |
|
4, electrically isolated |
Supported protocol |
|
CAN 2.0A (1−Bit−Identifier) CAN 2.0B (29−Bit−Identifier (”extended format”) CAN Calibration Protocol CCP eXtended Calibration Protocol (xCP−on−CAN) |
Bus link |
|
two wire, according to ISO11898−2 |
Transducer connection |
|
D-SUB-9 |
Supply voltage range (DC) |
V |
10 ... 30 (24 V nominal (rated) voltage) |
Supply voltage interruption |
|
max. 5 ms at 24 V |
Power consumption |
W |
< 6 |
Ethernet (data link) Protocol/addressing Connection Max. cable length to module |
− − m |
10Base-T / 100Base−TX TCP/IP (direct IP address or DHCP) 8P8C plug (RJ-45) with twisted pair cable (CAT-5) 100 |
FireWire (module synchronization, data link, optional |
MBaud |
IEEE 1394b (HBM modules only) |
supply voltage) |
| |
Baud rate |
400 (approx. 50 MByte/s) | |
Max. current from module to module |
A |
1,5 |
Max. cable length between the nodes |
m |
5 |
Max. number of modules connected in series (daisy |
− |
12 (=11 Hops) |
chain) |
|
|
Max. number of modules in a FireWire system |
− |
|
(including hubs, backplane) |
|
24 |
Max. number of hops |
− |
14 |
Synchronization options EtherCAT NTP IRIG−B (B000 to B007; B120 to B127) |
|
FireWire (automatically, recommended) via CX27 via Ethernet via MX440A- or MX840A input channel |
Nominal (rated) temperature range |
°C [°F] |
−200... +60 [−4 ... +140] |
Operating temperature range |
°C [°F] |
−20 ... +65 [−4 ... +149] |
Storage temperature range |
°C [°F] |
−40 ... +75 [−40 ... +167] |
Rel. humidity |
% |
5 ... 95 (non condensing) |
Protection class |
|
III |
Degree of protection |
|
IP20 per EN60529 |
Mechanical tests |
m/s2 |
50 |
Vibration (30 min) | ||
Shock (6 ms) |
m/s2 |
350 |
EMC requirements |
|
per EN 61326 |
Dimensions, horizontal (W x H x D) |
mm mm |
52,5 x 200 x 122 (with case protection) 44 x 174 x 119 (without case protection) |
Weight, approx. |
g |
8504) |
QuantumX MX471B - datasheet | PDF, 0.1 Kb |