Products

Single Point Load Cell FIT®/5

Special features

Type			FIT5A
Accuracy class 1)			C3 3000
Number of load cell verification intervals	nLC		C3 3000
Fraction	Plc		0.8
Maximum capacity	Emax	kg	5	10	20	30	50
Minimum load cell verification interval (standard)	vmin	g	0.5	1	2	5	5
Minimum load cell verification interval (option)	vmin	g	0.2	0.5	1	2	2
Temperature coefficient of the zero signal per 10 K (standard) 1)2)	TC0	% of Cn	±0.0160			0.0260	0.0160
Temperature coefficient of the zero signal per 10 K (option) 1)2)	TC0	% of Cn	±0.0064	±0.0080		±0.0106	±0.064
Maximum platform size		mm	400 x 400
Nominal (rated) sensitivity	Cn	digit	1 000 000
Zero signal		digit	0 ±100 000
Temperature coefficient of the sensitivity per 10 K in the temperature range 4) +20 … +40°C −10 … +20°C	TCS	% of Cn	±0.0218 ±0.0150
Non-linearity 4)	dlin		±0.0166
Relative reversibility error 4)	dhy		±0.0166
Minimum dead load output return	MDLOR		±0.0166
Off-center load error 3)			±0.0166
Nominal (rated) ambient temperature range	BT	°C	−10 … +40
Operating temperature range	Btu		−10 … +50
Storage temperature range	Btl		−25 … +70
Limit load at 20 mm eccentricity	EL	% of Emax	1000
Service load at max. 120 mm eccentricity			150
Relative vibrational stress at max. 50 mm eccentricity	Fsrel		70
Nominal (rated) displacement 5)	snom	mm	<0.2
Weight, approx.	G	kg	3
Degree of protection per DIN EN 60 529 (IEC 529)			IP68 (test condition 1 m water column / 100 h); IP69K (water at high pressure, steam cleaner) 6)
Voltage supply Operating voltage (DC) Power consumption Start-up current	UB	V W A	+10 … +30 :::2 <0.2
Measuring body material			Stainless steel 1.4545 7)

Single Point Load Cell FIT®/5 - datasheet

PDF, 0.17 Kb