KontrollVahend ja Tehnika (KVT) OÜ
Exclusive representative
Hottinger Baldwin Messtechnik GmbH, Germany
+372 6006190
+372 6006680


Products

Gateway CAN-Ethernet

Special features

  • Ethernet interface
  • For connecting AED/FIT products with CANopen interfaces
  • Remote monitoring/diagnosis possible via Ethernet
  • Additional CC‐Link interface for PLC systems from Mitsubishi with CC‐Link field bus interface
  • CLPA tested

Basic device

CAN‐Ethernet Gateway

Permissible supply voltage range

VDC

18 ¼ 30

Power consumption, approx.

A

0.1 at 24 V

Ethernet interface

Transmission protocol

TCP/IP, UDP, HTTP, DHCP, Modubus‐TCP

Transfer rate, max.

MBit/s

10 and 100 (automatic selection)

Topology (twisted pairs)

2

LED display for Receiver, Transmitter (RxD/TxD) and Link

2

Line length, maximum

m

100

Cable type

UTP category 5 or shielded twisted pair (STP)

Connecting socket

RJ-45

CAN interface (CANopen‐Master)

Protocol

CAN 2.0B; CANopen compatible

Hardware bus link

to ISO 11898

Baud rates

kBit/s

1000

800

500 250 125 100 50

20

10

Maximum line lengths

m

25

40

250 400 600 1000 1000

1000

1000

Maximum number of AED or FIT nodes

128

Connection

D‐Sub socket, 9‐pin, assignment as per CiA

CC‐Link (Remote Operation Station)

Version

1

Station number

1 ¼ 64

Baud rates

kBit/s

10000

5000

2500

625

156

Number of occupied stations

1 ¼ 4

Cable type

As per CC‐Link specification 1.10

Speed

max. 10 Mbit with 100 m line length

Connection

Sub‐D plug, 9‐pin (with voltage supply)

General specifications

Temperature range

°C

-10 ¼ +40

Nominal (rated) temperature range

Operating temperature range

°C

-10 ¼ +60

Storage temperature range

°C

-20 ¼ +80

Degree of protection (per DIN EN 60529 / IEC 60529)

IP20

Dimensions (W x H x D)

mm

76.1 x 95 x 24

Weight, approx.

g

220

Gateway CAN-Ethernet - datasheet PDF, 0.47 Kb